| |
|
|
• Heavy Duty, High Speed
• Low Cost
• High Productivity
• Large Cross Section of Swing Frame
• Integral Front and Rear Bed Design
|
Specification
|
Cutting Capacity |
ø 250 &  230 X 230 mm |
Blade Size |
3760 X 27 X 0.9 mm |
Feed Length |
0-400 mm |
Drive Motor |
3 H.P. |
Hydraulic Motor |
1 H.P. |
Coolant |
0.15 H.P. |
Machine Operations |
Hydraulic |
Cutting Speed |
22, 44, 66, 88 m/min ( 4 Step SPZ - Pulley ) |
Band Tension |
Manual |
Overall Size L x W x H |
1975 X 1950 X1730 mm |
Machine Weight |
800 Kg. |
Bundle Cutting Size
( Optional Equipment ) |
110 - 150 X 60 - 100 H mm |
|
| |
|
|
Vertical Saw Head
Vertical saw head is supported by two rigid pedestal bearings, Blade is guided by two hardened guide roller and tungsten carbide wear parts. Blade tensioning and releasing is done by manually.
Saw Feed
“Up and Down” Motion of head is controlled by one hydraulic cylinder. Feed for various materials is regulated by pressure relief valve.
Clamping
Clamping of job is done by hydraulic vice. The jaw of the vice is perpendicular to the blade. The moving jaw of the vice clamps the job with sufficient hydraulic pressure. For tube cutting variable vice pressure systems will
be available as optional accessories.
Accuracy
Taper 0.1 mm for 100 mm. Length ± 0.2 mm
Band Wheels
Drive and driven band wheels with optimum centre distance gives smooth blade twisting force which results in excellent performance of blade
Standard Equipments
1. Complete electrical equipments with panel board, limit switch and elctric motors
2. Complete hydraulic systems with Yuken make DC valve
3. Coolant system with pump and piping
4. Power driven chip brush for easy chip removal from blade.
5. One M42 grade Bimetal blade.
6. Operation tools and spanners.
Optional Equipments
1. Chip brushes
2. Roller table 1500 mm
3. Bimetal band saw blade
4. Variable vice pressure
5. Nesting Fixture assembly for bundle cutting up to ø 35 mm polish bars. |
| |
| |
|
|
| - |
| |
FULLY AUTOMATIC - HORIZONTAL SWING TYPE BANDSAW MACHINES : MODEL - HSM 250
|
| |
|
|
• Heavy Duty, High Speed
• Low Cost
• Large Cross Section of Swing Frame
|
Specification
|
Cutting Capacity |
ø 250 & 230 X 230 mm |
Blade Size |
3760 X 27 X 0.9 mm |
Drive Motor |
3 H.P. |
Hydraulic Motor |
1 H.P. |
Coolant Pump |
0.15 H.P. |
Machine Operations |
Hydraulic |
Cutting Speed |
22, 44, 66, 88 m/min ( 4 Step SPZ - Pulley ) |
Band Tension |
Manual |
Overall Size L x W x H |
1975 X 1950 X1730 mm |
Machine Weight |
450 Kg. |
|
| |
|
|
| |
Vertical Saw Head
Vertical saw head is supported by two rigid pedestal bearings, Blade is guided by two hardened guide roller and tungsten carbide wear parts. Blade tensioning and releasing is done by manually.
Saw Feed
“Up and Down” Motion of head is controlled by one hydraulic cylinder. Feed for various materials is regulated by pressure relief valve.
Clamping
Clamping of job is done by hydraulic vice. The jaw of the vice is perpendicular to the blade. The moving jaw of the vice clamps the job with sufficient hydraulic pressure. For tube cutting variable vice pressure systems will
be available as optional accessories.
Accuracy
Taper 0.1 mm for 100 mm.
Band Wheels
Drive and driven band wheels with optimum centre distance gives smooth blade twisting force which results in excellent performance of blade
Standard Equipments
1. Complete electrical equipments with panel board, limit switch and elctric motors
2. Complete hydraulic systems with Yuken make DC valve
3. Coolant system with pump and piping
4. Power driven chip brush for easy chip removal from blade.
5. One M42 grade Bimetal blade.
6. Operation tools and spanners.
Optional Equipments
1. Chip brushes
2. Roller table 1500 mm
3. Bimetal band saw blade
4. Variable vice pressure |
| |
|
| - |
| |
| |
|
| |
| |
| - |
